This series design is compact, mature technology, reasonable structure, stable operation, high quality, energy efficient, by the various types of customers can be widely applied to various types of hard / soft conductor wire (copper wire, enameled wire, tinned wire stranding of copper clad steel, copper clad aluminum, etc.) and electronic line, such as: power cord, telephone cable, audio cable, video cable, car lines, network lines. 
 Technical characteristics Technique Feature: 
 A. The maximum spindle speed of 3000rpm. 
 Two. Automatic tension control: stranded when the closing line from the bottom of the plate to receive a full plate up tension need to be constantly increasing, the function of automatic tracking adjustment up tension; the whole plate up tension even while the machine can not downtime adjust the tension. 
 3. The host for the lubrication oil, natural circulation cooling, effectively extending the spindle bearing life. 
 Over the line using the new structure, the wire from the spindle guide pulley directly over the line to the bow belt, minus the phenomenon of a corner in the aluminum plate on the guide wheel failure caused by scratching and jumping shares. 
 4. Machine equipped with three squeeze the device to ensure that the roundness in the conductor stranded and reduce the loss of insulating materials. 
 5 Machine with belt drive, lubrication points, keep the machine clean, wire free of grease, to adapt to all types of surface cleanliness requirements of the higher line conductor stranded. 
 6. Adjust the twist away from simply replace a lead take the wheel, adjust the twist sliding the commutating pole, simple to operate, thereby reducing operator error rate and intensity of the work. ? Machine bearings are used well-known brands in Japan, bow with new material, flexible, and at high speeds to avoid due to the vibration caused by the jump shares, the inverter, PLC, magnetic clutch, electromagnetic brake, hydraulic jacks, etc. imported well-known brand, to reduce the failure rate and maintenance costs. 
 Technical parameters Technique specifications: 
 Specifications Model TZ-300P TZ-400P TZ-500P TZ-650P 
 Use for more than Chiku copper stranded 
 Rotation speed Max: 3000rpm Max: 3000rpm Max: 3000rpm the Max: 1800rpm 
 To the diameter φ0.05-φ0.28mm φ0.08-φ0.45mm φ0.08-φ0.45mm φ0.16-φ0.45mm 
 Stranded off an area of ??0.035-0.45mm 0.35-1.5mm 0.35-1.5mm 0.8-5.5mm 
 Lay 3-17mm 4.08-31.5mm 5.7-52.8mm 11.4-100.02mm 
 Winding shaft φ300mm φ400mm φ500mm φ650mm 
 Drive motor 5HP motor and inverter 5HP motor and inverter 5HP motor and inverter 7.5HP motor and inverter 
 Refuse to pay an area of ??1450 × 750 × 1020 2300 × 1000 × 1200 2400 × 1000 × 1240 2900 × 1510 × 1650 
 Twist to the S to Z 
 Cable bearing cable row spoke row spacing can be adjusted 
 Brake electromagnetic brake, break inside and outside the automatic braking 

 Address: No.30 Liuzhou Road, Jiaozhou, Qingdao, Shandong 

 Phone: 0532-82222521 

 Fax: 0532-82222521 

 Contact: Manager Song Tel: 13455253015 

 E-mail: minghaimachine@163.com 

 Web site: www.minghaimachine.com